Fire Resistant Paint Intumescent Coating for Steel Steel Paint Fire Expansible Fireproofing Coating

• Customization: Available
• Dispersion Medium: Water Base Steel Structure
• Fire Prevention Mechanism: Expansion Steel Structure
• Model NO.: IETSSFC
• Thickness: Thin
• Use: Fireproof Coatings For Steel Structures
• Item: Environmental
• Type: High-Temperature Adhesives
• Grade: Grade a
• Refractory Temperature: Over 2000 ºC
• Material: Organic Resins and Inorganic Polymer Materials
• Transport Package: 25kg/Barrel
• Specification: fireproof paint
• Trademark: BAOHANG
• Origin: Hebei
• HS Code: 6902900000
• Production Capacity: 50000t/Year

Product Description

Product Description

Indoor expansion type steel structure fireproof coating
Product Introduction:
Indoor expansion type steel structure fireproof coating is a new product that meets the national fire protection standards for steel structure engineering and components, and has good decorative effects. The execution standard is GB14907-2018. It is a similar product to the execution standard GB14907-2002 for indoor thin and ultra-thin steel structure fireproof coatings. Our company has mature production processes to ensure stable product quality.

This coating is made by using various organic resins and inorganic polymer materials through special assembly processes, bonding the base material, adding expansion catalysts, carbonizing agents, fire retardants, additives, and pigments through high-speed dispersion, grinding, and other processes. This coating has outstanding fire resistance, thin coating, strong adhesion, high fire resistance limit, and fast drying during construction. In the event of a fire, the coating will rapidly expand and form a dense insulation layer when exposed to fire, preventing the transfer of heat to the steel substrate and highlighting the decorative effect.

It can be widely used for fire protection of steel structure surfaces in auditoriums, cinemas, hotels, hospitals, office buildings, shopping malls, as well as special buildings (petrochemical facilities, substations, etc.), transportation, electronics and telecommunications, machinery manufacturing, and other industries. Water based or solvent based (i.e. water-based or oil-based) can be selected according to regulatory requirements. Our company is equipped with a professional construction team, with exquisite technology and thoughtful service.

The models are divided into GT-NSP-Fp2.00-2.50h-BH03
GT-NSP-Fp2.00-BH03                                            
GT-NSP-Fp1.50-BH03 
GT-NSP-Fp1.00-BH03 
GT-NSP-Ft2.00-HBBH

Performance indicators:

State in container	Drying time (surface drying)	Initial drying crack resistance	Bond strength	Insulation efficiency deviation	Water resistance performance	Cold and hot cycling resistance
After stirring, it appears in a uniform and delicate state or a thick fluid state, without clumping	≤12h	No cracks should appear	≥0.15MPa	±15%	After 24 hours of testing, there is no peeling, foaming, or peeling of the coating, and the decrease in insulation efficiency should be ≤35%	After 15 tests, the coating should have no cracking, peeling, or bubbling, and the insulation efficiency should decrease by a certain amount≤35%

Fire resistance time :

Fire resistance time	Fp2.5h	Fp2.0h	Fp1.5h	Fp1.0h	Ft2.0
Coating thickness	4.3mm	5.38mm	2.3mm	1.7mm	4.5mm

Construction method:
1. Before construction, the steel surface should be derusted, oil stains and floating soil should be removed, and anti rust paint should be applied;
2. Indoor expansion type steel structure fireproof coating can be applied by brushing or spraying. The use of brushing technology for construction is the same as that of ordinary paint brushing method; The spraying construction adopts a self weight spray gun and uses a small air compressor air source for spraying construction. The air compressor pressure is adjusted to 0.4-0.6Mpa;
3. Before applying the paint, use a handheld mixer to mix the paint evenly. Pay attention to the consistency of the coating. If it is too thick, it can be diluted appropriately;
4. The thickness of each coating should not flow downwards. Generally, the thickness of the first coating should be around 0.3-0.5mm. After the previous coating has solidified, the next coating should be applied until it reaches the thickness required by the fire resistance limit level;
5. Before the coating is fully cured, it should not be exposed to rain. When the wind force is greater than level 4, wind protection measures should be taken during spraying construction; 
6. The coating is generally white, and if there are special needs for other colors, it depends on the customer's requirements.

Packaging and Transportation:
1. The construction temperature should be above 5 ºC, and the relative temperature should be ≤ 90%;
2. Indoor expansion type steel structure fireproof coating plastic bucket packaging. Do not store outdoors or expose to sunlight.
3. The storage temperature is 0-35 ºC, and the effective storage period of the product is 6-12 months.
4. During transportation, measures should be taken to prevent rain, direct sunlight, freezing, and impact, and relevant regulations of the transportation department should be followed.

Hot Products

 

 

Company Profile

Packaging & Shipping

FAQ

Q1, Are you manufacturer or trading factory?

A: In fact we are the factory more then 10 years, can supply all types of paint.

 

Q2, If the OEM is accepted?

A: Yes, OEM is welcome. We also can do your own logo and package.

 

Q3, If I do not know which paint to choose, what shall I do?

A: Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.

 

Q4, What's are your payment term?

A: We can accept the TT, Western Uniono, LC, Credit card, and Alipay, and others please contact with us freely.

 

Q5, Can you accept to supply the free sample?

A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight cost.

  

Q6, What's your products' advantages?

A. Good quality and competitive prices.

B. Strictly quality control when producing.

C. Professional team work, from design, development, producing,assemble,packing  and shipping.

D. Experience for shipping the paint to different countries.

 

Q7, Can we visit your factory?

You are Warmly welcomed to visit our factory, it would be our great pleasure!