Cheap Chemical Additives Paint Remover for Remove Old Paint Film From Furniture

• Customization: Available
• Appearance: Liquid
• Usage: Auxiliaries Paint Remover
• Model NO.: auxiliaries paint remover
• Color: Yellow
• Item: Environmental
• Main Raw Material: Acrylic
• Usage1: Building Coating, Road Marking Paint
• Application Method: Brush
• State: Liquid Coating
• Transport Package: Carton
• Specification: 60X70X80 cm/40kg
• Trademark: BAOHANG
• Origin: Hebei
• Production Capacity: 50000t/Year

Product Description

Product Description

Product Introduction:

Paint remover is a liquid composed of aromatic compounds and high solubility solvents, with a strong ability to dissolve paint film, paint remover speed, high efficiency, can remove a wide range of coating types, suitable for alkyd, nitro, polyurea rubber type ethylene, epoxy, polyester, polyurethane and other paints, exterior wall coatings, powder spraying, coating removal. Compared with similar foreign products, the paint removal effect is the same, and the paint removal time can be saved by about 20%.

Paint removers are divided into acidic paint removers, alkaline paint removers, and neutral paint removers. Paint removers, also known as paint removers, paint washers, or paint removers, are composed of solvents such as chlorinated hydrocarbons, ketones, esters, alcohols, and benzene series. The use of solvents has a penetrating and swelling effect on the covering material, which can effectively remove various substrate surface paints, coatings, etc. In addition, there are water-based paint removers.

Paint remover is mainly used to remove old paint films from metals, templates, wooden boards, furniture, and various products, without damaging the substrate and without any corrosion to metal products. It is an industrial compound.

Q&A on the effectiveness of paint removers
1. Is the paint stripping process too slow, and what are the reasons and solutions for incomplete paint stripping?
Answer: It may be that the product selection is not suitable, and it is recommended to use "high-efficiency paint remover" products. If the cleaning is not thorough, it is recommended to use a wire brush for cleaning.

2. How to improve the unpleasant odor emitted by the degumming agent during soaking treatment?
Answer: Sealing treatment can be carried out by adding water. It is recommended to use in a cool and ventilated place.

3. What is the effect of mixing degumming products with water?
Answer: The paint stripping effect is slightly poor, and the effect is not significant! Gently pour out the added water to reduce moisture.

4. How to control the time of soaking treatment?
Answer: Generally, it is based on the removal of the paint film. After the paint film is removed, stop soaking. Some adhesives that are soaked for a long time can change the color of the workpiece itself.

5. Does the thickness of the film layer affect the processing time?  How to control it
Answer: Generally, the thicker the film layer, the longer the processing time, and the specific time depends on the workpiece. Small experiments can be conducted, and attention should be paid to observing the phenomenon of paint peeling during the experiment to determine the specific operating time. Use on a large scale only after satisfaction.

6. What products should be used to remove the film layer above the solar water heater?
A: "Neutral paint remover" can be used in this case    
 

Product name	paint remover
Place of Origin	China
Usage	Flame retardant scene
Delivery Time	15-30Days
Packing	Box
Brand Name	FUMU SHENG
Product quality	High quality
Service life	1year
Payment method	TT
OEM	acceptable

Product performance

Paint stripper is suitable for removing old epoxy paint, polyurethane paint and other cross-linked curing paint film. The paint remover is easy to use and has high paint removal efficiency. The main performance is:

1. The product is white milky liquid, tasteless and non-burning.

2. The product is tasteless, non-toxic, stable quality, environmental protection and efficient

3. No damage to the substrate, molecular weight unchanged before and after cleaning, to achieve high recovery; After cleaning, PC is transparent and bright, with high added value.

4. Without concentrated sulfuric acid, the process is completed in one step, simple and safe.

5. Short cleaning time, save energy, effectively improve productivity, suitable for continuous large-scale automated production, greatly reduce labor costs. The process is simple and environmentally friendly, non-toxic and harmless.
6. ABS,PE,PVC,PET,PP,PS.
Application: all kinds of plastic surface paint, paint, degumming, ABS, PE, PVC, PET, PP, PS, etc.

Construction precautions

1, the use of paint remover to wear protective equipment, especially wear protective glasses
2. Never face the mouth of the barrel when opening the lid.
3, if accidentally splashed on the skin, should immediately rinse with plenty of water.
4. Rough loading and unloading is strictly prohibited during transportation. The maximum loading is not more than 2 layers, and it is strictly prohibited to put it upside down or upside down
5, not more than 2 layers, away from the fire source.
6, storage temperature at 0-35ºC, should avoid direct sunlight or high temperature environment.
7, if the barrel is full of gas, should slowly open the lid, do not suddenly open, so as to avoid splashing
8, when applying this product should not be too much, too much waste; However, it should not be too little, too little does not work, should depend on the thickness of the film site.
9, paint this product should be removed after the paint bite, not too early, too early has not reacted completely; It should not be too late, too late the paint film becomes hard, should not be removed, should master the paint film with the shovel.
10. The paint film should be removed with a spatula after being bitten. It is strictly prohibited to erase with cotton silk or cotton cloth
11. The template temperature should not be too high or too low when removing the template paint, otherwise it will affect the paint removal effect. Solution: cooling and heating of the template to improve the effect of paint removal.

store

Store in a cool place, away from direct sunlight.

Usage method

1, immersion type: The need to remove the paint all the workpiece immersed in the paint remover 0.5-5 minutes, the old paint film produces strong swelling, bulge, you can All off, after taking out with high pressure water to knock off the residual paint on the surface of the workpiece, with clean water.

2, brushing type: for large pieces of work can be brush or cotton yarn to paint the paint agent on the part of the paint, for thick paint film workpiece, can be repeatedly painted 2-3 times, until the paint film falls off, after the cleaning process is the same as immersion.

3, when soaking, put the agent in the anti-corrosion container, add appropriate amount of water to seal the agent to prevent volatilization. The processing time is different due to different resins.
Apply directly to the surface of the paint film when brushing, and the paint film will slowly puff up and fall off.
 

Hot Products

 

 

Company Profile

Packaging & Shipping

FAQ

Q1, Are you manufacturer or trading factory?

A: In fact we are the factory more then 10 years, can supply all types of paint.

 

Q2, If the OEM is accepted?

A: Yes, OEM is welcome. We also can do your own logo and package.

 

Q3, If I do not know which paint to choose, what shall I do?

A: Please no need to worried about this, we have the professional engineer, colorist, and experienced sales, can give you the suggestion for paint and coating.

 

Q4, What's are your payment term?

A: We can accept the TT, Western Uniono, LC, Credit card, and Alipay, and others please contact with us freely.

 

Q5, Can you accept to supply the free sample?

A: Yes, of course we are glad to supply the free sample, and you need in charge of the freight cost.

  

Q6, What's your products' advantages?

A. Good quality and competitive prices.

B. Strictly quality control when producing.

C. Professional team work, from design, development, producing,assemble,packing  and shipping.

D. Experience for shipping the paint to different countries.

 

Q7, Can we visit your factory?

You are Warmly welcomed to visit our factory, it would be our great pleasure!